#Kofax vrs software download
#Kofax vrs install
#Kofax vrs software
#Kofax vrs Pc

#Kofax vrs software

The following screen shot illustrates installing the software for a remote site single machine (standalone choice).

#Kofax vrs Pc

In that situation, the PC with the scanner acts as a server PC with a different installation and the validation PC (Client PC) uses an installation option from files on the server PC. However, there are several PC's statewide that use an option called 'Dual Workstation' where a second PC can be used to validate documents scanned at another PC that is attached to the scanner.

Most PC's use the 'standalone' installation option. Verify the site name for this PC (see 3.9 and return here).

You can continue at this point, but in step 3.6.7 of the installation, you will have to wait until you get a license to sync up to the server. Click on the Contact Us link in this handbook to coordinate. This section must be coordinated with DHS staff. See the examples below for direction on this process.ДЇirst, shut down all other software except for the browser with this ECF handbook open. Instead of running the вЂautorun.exeвЂ™ you will need to execute the вЂsetup.exeвЂ™ with the вЂNoVRSвЂ™ switch.

Kofax Capture can now be installed using the /NoVRS switch from the Run Command of Windows.

In section 3.6.2.1 you downloaded Kofax and corresponding files. To work around this, you must not use the autorun.exe installation file from Kofax since it installs VRS 4.5. However, that version is not supported by the new Fujitsu scanners.

#Kofax vrs install

The standard installation files from Kofax automatically install VRS version 4.5. This completes the configuration process of the VRS 5.0 software. Then click вЂOKвЂ™ on the confirming message and close the VRS Administration Console.

Enter your license keys supplied with the VRS CD that came bundled with your scanner.Д¬lick вЂActivateвЂ™, you should then receive a confirming message that your вЂVRS software is now ActivatedвЂ™.

See the next screen shot following the one below. If it DOES NOT state the license is вЂBuilt-InвЂ™ as in the screen shot below then you will need to enter license codes and activate the software license.

T hen click вЂConfigure SourcesвЂ™ and pick вЂwith SVRS with AIPEвЂ™ and then click вЂSet Device Default SourceвЂ™.

Begin by selecting the Scanner Configuration option and selecting your scanner model.

Use the Kofax VRS Administration Console to configure the VRS 5.0 software.

With VRS 5.0 you have a separate program group.

When you return to section вЂ 3.6 Scanner Installation ProceduresвЂ™ you can skip sections 3.6.11 and 3.6.12 which are accomplishing the same steps for VRS 4.5. The screen shots below document the steps necessary to configure the scan source and license your version of VRS 5.0. At the appropriate time select your scanner model.

Install the VRS software from the bundled CD supplied by Fujitsu following the installation prompts.

Attach the new scanner using the USB connection and power the unit on.

Install the VRS 5 and Kofax software in the following order: Do not reinstall Kofax with the instructions in section 3.6.3.5.

Search for it on the C drive of the scanner PC or download it again here.

#Kofax vrs software download

This was downloaded as part of the Kofax software download (from 3.6.2.1).

Run the Kofax Capture Cleanup Utility in 3.6.3.4.

See 3.6.3.2 to uninstall all Kofax software.

If you already have Kofax and VRS 4.5 installed, but recently purchased the Fujitsu 6230Z, you must un-install the previous Kofax installation and clean the system using the Kofax Cleanup Utility. If you are not using that specific scanner, click the back button and follow the instructions for all other scanners at section 3.6.3.5.

you already have this software installed and recently purchased the Fujitsu 6230Z scanner.

installing Kofax and VRS software on a PC while using a Fujitsu 6230Z scanner or,.

You have been directed here because you are either: